CALL US

+91 9148155741 / 94828 34147

MAIL US

info@splta.com

Ceta

Co-Operation Partner

LEAK TESTER

Home   Products / Leak Tester

Leak Tester CETATEST XS

The CETATEST XS is a compact, cost-effective and full automatically working leak tester for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor for the measurement of the pressure loss caused by the leakage in the test part.

Leak Tester CETATEST XS

Leak Tester CETATEST XS

Leak Tester CETATEST XS

Leak Tester CETATEST XS

Pressure sensor Gauge pressure sensor
Pressure ranges 0.010 - 0.200 bar, 1.000 bar, 8.000 bar, 0.2 - 8.00 bar
Measurement range up to 9,999 Pa, depending on the pressure range
Result units Pa, hPa (pressure loss), bar (test pressure)
Test mode Pressure loss measurement
Dimensions 280 mm x 96 mm x 250 mm (W x H x D)
Typical applications Leak tests which require a large measuring range

Leak Tester CETATEST 515

The CETATEST 515 with differential pressure sensor is a full automatically working leak detector for the detection of untight parts within the cycle time of the production process. The leak detector is available in three different types: 1. The configuration “closed components - high resolution” can be used for test parts, which can not be filled, so called “closed components”. It is possible to detect very small ratios of test part volumes (0.03 ml < ΔV < 1.0 ml). 2. The type “pressure loss - high speed” can be used for leak tests of very small test parts in high speed production cycles. 3. The configuration “pressure rise” has a 50 % larger measurement signal (compared to the CETATEST 815).

Leak Tester CETATEST 515

Leak Tester CETATEST 515

Leak Tester CETATEST 515

Leak Tester CETATEST 515

Pressure sensors Differential pressure sensor, gauge pressure sensor
Pressure ranges -1,000 mbar, 200 mbar, 1000 mbar, 6 bar, negative and positive gauge pressure ranges can be combined (e.g. -1 bar/+1 bar)
Measurement range ± 500 Pa, ± 5,000 Pa in 1 Pa-steps
Result units Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, Torr, mmWs
Pressure controller Electronical (primary pressure), mechanical (secondary pressure, type “pressure rise”)
Test mode Pressure decay, closed component - high resolution, pressure decay - high speed, pressure rise
Dimensions 345 mm x 145 mm x 435 mm (W x H x D)
Typical applications Tests of micro switches, sensors, relays, valves, watches

Leak Tester CETATEST 715

The CETATEST 715 is a full automatically working leak detector for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range. Therefore the CETATEST 715 is especially qualified for the simple testing of parts with large leakages. The test modes “test of closed component” and “dynamic pressure test” can be integrated on demand.

Leak Tester CETATEST 715

Leak Tester CETATEST 715

Leak Tester CETATEST 715

Leak Tester CETATEST 715

Sensor type Gauge pressure sensor
Pressure ranges -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 16 bar, 20 bar, negative gauge pressure and positive gauge pressure ranges can be combined, (e.g. -1 bar/+1 bar, -1 bar/+6 bar)
Measurement range Max. +/-10,000 Pa, depending on the test pressure (resolution: 1 Pa)
Result units Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr
Pressure controller Mechanical, electronical
Test mode Pressure decay measurement, dynamic pressure test (option), test of closed components (option)
Dimensions 345 mm x 145 mm x 435 mm (W x H x D)
Typical applications Tests of sanitary armatures, plastic weldings, ball valves

Leak Tester CETATEST 815

The CETATEST 815 is a full automatically working leak tester for the detection of untight parts within the cycle time of the production process. The pressure in the test part volume is compared with the pressure in a tight reference volume.

The CETATEST 815 can be equipped with a multitude of test modes and is applicable for a lot of applications. The 24 bit AD converter und its high clock rate allows short test times.

The CETATEST 815 can be delivered as 2 channel test device. Parameter can be exported resp. imported using an USB storage device. Measurement series and measurement curves can be stored also.

NEW : Leak Tester Series CETATEST 815 Low Pressure with Electronically Controlled Pressure Ranges (± 5 mbar and ±50 mbar)

Leak Tester CETATEST 815

Leak Tester CETATEST 815

Leak Tester CETATEST 815

Leak Tester CETATEST 815

Pressure Sensors Differential pressure sensor, gauge pressure sensor
Pressure ranges -1 bar, +/-5 mbar, +/-50 mbar, 200 mbar, 1000 mbar, 6 bar, 10 bar, 20 bar, 30 bar, negative gauge pressure and positive gauge pressure ranges can be combined, (e.g. -1 bar / + 1 bar)
Measurement range ± 500 Pa / ± 5,000 Pa (displayed resolution: 1 Pa, internal resolution: effective 0.01 Pa)
Result units Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, Torr, mmWs
Pressure controller Mechanical, electronical
Test mode Pressure decay, optional: sealed component, ram pressure, pressure steps, pressure rise (with double leak connector)
Dimensions 345 mm x 145 mm x 435 mm (W x H x D)
Two channel operation As option available
Typical applications Components that should be waterproof, oil-tight or gas proof