Axis - 886 Leak Tester is a double station vacuum leak detection system and specially manufacturing for detecting micro leaks at negative pressure leak detection system with double station. Pneumatic system operating cycle minimum 1,00,00,000 cycles, user friendly operating system. High accuracy differential pressure sensors are using 0.07% of FS at ±500pa, ±1000pa, ±2500pa, ±5000pa.
Differential pressure loss measurement: The procedure is based on comparison of the pressures within the test part volume and within a reference volume.
Fast 24bit A/D converter real-Time processing of the measurement signal.
Testing pressure range: (-100-0mbar, -500-0mbar, -1000-0mbar)
Measuring range differential pressure sensor: ±500pa,±1000pa, ±2500pa, ±5000pa
Mechanical or Electronic regulator range (-1000 – 0mbar)
Upto 32 programs * 2.
7" colour touch display.
Calibration leak port.
Auto zero calibration.
Data logging standard USB port.
Up to 60,000 data storage.
Unit: pa, pa/s, mbar, psi, bar, kpa and customized.
Unit for flow: ccm, sccm, ml/min, l/min, l/hr
Differential pressure leak rate method
Differential pressure leak standard
Rs 232 communication data storage
IO connector
10 inputs and 3 outputs with up to 5 programming bits *2.
Expandable download USB port
Firmware updating port
Options: Ethernet/IP, profinet
Dimensions: (WxHxD) 340x350x462mm
Weight: 25kg
230VAC/50Hz
Operating temperature: 10°C - 45°C
Clean, dry, non-corrosive gases
Test pressure: -1-0bar.
