Axis-676 Leak tester is a single station leak detection system and specially manufacturing for detecting micro leaks at low pressure and High-Pressure leak detection system. Pneumatic system operating cycle minimum 1,00,00,000 cycles, user friendly operating system. High accuracy differential pressure sensors are using 0.07% of FS at ± 500pa, ± 1000pa, ± 2500pa, ± 5000pa.
Differential pressure loss measurement: The procedure is based on comparison of the pressures within the test part volume and within a reference volume.
Fast 24 bit A/D converter Real-Time processing of the measurement signal.
Testing Pressure Range Pressure Sensor: -1-0bar, 0-0.1bar, 0-1bar, 0-7bar, 0-10bar, 0-16bar above 10bar is customized.
Measuring Range Differential Pressure Sensor: ±500pa, ±1000pa, ±2500pa, ±5000pa
Mechanical or Electronic Regulator Range -1-0bar, 0-1bar, 0-7bar, 0-10bar. Above 10bar is customized.
Up to 32 programs.
4" colour touch display
Calibration leak port.
Auto zero calibration.
Data logging standard USB port.
Up to 60,000 data storage.
Unit: pa, pa/s, mbar, psi, bar, kpa and customized.
Unit for flow: ccm, sccm, ml/min, l/min, l/hr
Differential pressure leak rate method
Differential pressure leak standard
Tube test
Medical component
EV battery pack test
Rs 232 communication data storage
IO connector
10 inputs and 3 outputs with up to 5 programming bits
Expandable download USB port
Firmware updating port
Options: Ethernet/IP, profinet
Dimensions: (WxHxD) 230x300x400mm
Weight: 13kg
230VAC/50Hz
Operating temperature: 10°C - 45°C
Clean, dry, non-corrosive gases
Test pressure: -1-0bar, 0-1bar, 0-7bar, 0-10bar, 0-16bar. Above 10bar is customized
